买toilet 的问题

[tongmeng]

在网上选一个新的马桶，下面两款，最大的区别是：Water Area

7-1/2" x 6"

13-1/2" x 11"

我的问题： 这个数值越大，就意味着水面越大，水越深吗？

谢谢！

======================================
Overall Height: 27-1/8" (bottom of the base to the highest point on the toilet)
Overall Depth: 26-3/8" (back of the tank to the front of the rim)
Overall Width: 15-3/4" (furthest points left to right on fixture)
Bowl Height: 10-1/2" (base to the rim of the bowl)
Flow Rate: 1.28 gallons-per-flush
Water Area: 7-1/2" x 6" (inner bowl dimensions where water rests L x W)
Trip Lever Placement: Left
Rough In: 10"

======================================

Overall Height: 29-1/8" (bottom of the base to the highest point on the toilet)
Overall Depth: 29-1/8" (back of the tank to the front of the rim)
Overall Width: 19-1/2" (furthest points left to right on fixture)
Bowl Height: 14-1/2" (base to the rim of the bowl)
Flow Rate: 1 gallons-per-flush
Water Area: 13-1/2" x 11" (inner bowl dimensions where water rests L x W)
Trip Lever Placement: Left
Rough In: 12"

[cng]

你家的"Rough In"多大？

[BCQ1]

高不高的差别不大，主要看FLUSH RATE 1.28 gallons-per-flush
已经是省水的，不要买最便宜的PROJECT SOURCE GLACIER BAY
自己用稍微好点KOHLER和TOTO,太贵的也不值得,瓷要好的话
要500刀以上去了

[kuku]

你这两只有一个能装上，由rough-in 尺寸决定
现在的法规要求马桶用水最多1.28gpl
首先看MaP rating, 买1000的，这个保证能冲干净
之后再考虑其它的设计和美观问题

[mrmaja]

除了rough in参数很重要，高度也要注意，家里有老人选ADA compliant，没有的矮的就好

[YouHi]

买马桶很简单。只买TOTO就好。