在网上选一个新的马桶,下面两款,最大的区别是:Water Area
7-1/2" x 6"
13-1/2" x 11"
我的问题: 这个数值越大,就意味着水面越大,水越深吗?
谢谢!
======================================
Overall Height: 27-1/8" (bottom of the base to the highest point on the toilet)
Overall Depth: 26-3/8" (back of the tank to the front of the rim)
Overall Width: 15-3/4" (furthest points left to right on fixture)
Bowl Height: 10-1/2" (base to the rim of the bowl)
Flow Rate: 1.28 gallons-per-flush
Water Area: 7-1/2" x 6" (inner bowl dimensions where water rests L x W)
Trip Lever Placement: Left
Rough In: 10"
======================================
Overall Height: 29-1/8" (bottom of the base to the highest point on the toilet)
Overall Depth: 29-1/8" (back of the tank to the front of the rim)
Overall Width: 19-1/2" (furthest points left to right on fixture)
Bowl Height: 14-1/2" (base to the rim of the bowl)
Flow Rate: 1 gallons-per-flush
Water Area: 13-1/2" x 11" (inner bowl dimensions where water rests L x W)
Trip Lever Placement: Left
Rough In: 12"
买toilet 的问题
版主: QIANSHUIBA, F150
-
- 职业作家
- 帖子: 621
- 注册时间: 7月 28, 2022, 2:35 am
- 昵称(选填): mengmeng
-
- 论坛支柱
- 帖子: 12431
- 注册时间: 7月 29, 2022, 7:45 pm
- 昵称(选填): BCQ1
Re: 买toilet 的问题
高不高的差别不大,主要看FLUSH RATE 1.28 gallons-per-flush
已经是省水的,不要买最便宜的PROJECT SOURCE GLACIER BAY
自己用稍微好点KOHLER和TOTO,太贵的也不值得,瓷要好的话
要500刀以上去了
已经是省水的,不要买最便宜的PROJECT SOURCE GLACIER BAY
自己用稍微好点KOHLER和TOTO,太贵的也不值得,瓷要好的话
要500刀以上去了
-
- 论坛精英
- 帖子: 5401
- 注册时间: 8月 15, 2022, 3:28 am
- 昵称(选填): 小黄猫
Re: 买toilet 的问题
你这两只有一个能装上,由rough-in 尺寸决定
现在的法规要求马桶用水最多1.28gpl
首先看MaP rating, 买1000的,这个保证能冲干净
之后再考虑其它的设计和美观问题
现在的法规要求马桶用水最多1.28gpl
首先看MaP rating, 买1000的,这个保证能冲干净
之后再考虑其它的设计和美观问题
-
- 职业作家
- 帖子: 705
- 注册时间: 7月 30, 2022, 12:25 pm
- 昵称(选填): Tacoma
Re: 买toilet 的问题
除了rough in参数很重要,高度也要注意,家里有老人选ADA compliant,没有的矮的就好