分页: 2 / 2

#21 Re: change oil yourself

发表于 : 2024年 4月 28日 18:35
tangshui
wolf_north_1234 写了: 2024年 4月 16日 17:07 Hi.

Today I went to Costco, I found out that the engine oil is on sale, 10 quarte for $30.

图片
打折期限快到了,今天我也买了一箱屯着。上次换下来的两辆车的旧机油还在车库里放着,今天又放了一箱新的,廉颇稍有微词。 :D

#22 Re: change oil yourself

发表于 : 2024年 4月 28日 18:43
juderiverman
Do it yourself

据说,YouTube 视频让 Handyman 少赚不少

#23 Re: change oil yourself

发表于 : 2024年 4月 28日 18:54
cng
wolf_north_1234 写了: 2024年 4月 16日 21:53 架好车,一点也不危险。

重复一遍,架好车,用4 个jack stands.

如只架前轮,要拉起手刹,且用wheel block顶住二后轮。
Ramp 比較占空間,但比jack stand 安全。我知道有人jack stand 沒架好倒下的。

#24 Re: change oil yourself

发表于 : 2024年 4月 28日 23:10
geniushanbiao
cng 写了: 2024年 4月 28日 18:54 Ramp 比較占空間,但比jack stand 安全。我知道有人jack stand 沒架好倒下的。
我修车时候如果到下面干活一定要每侧至少2个jackstands,一个架顶车点,另一个放在control arm和subframe连接的那个地方以备不测(这个用ramp的时候也这么干)。另外一般顶车起来的那个floor jack我也会留在Center jack point那里。

另外最重要的一点,如果架前轮,要在后轮那里放wheel choke,反之亦然。我之前有过一次教训,后驱的奔驰架后轮没有在前轮放choke结果车就开始roll。好在我另一个习惯把拆下来的轮子放在车下面接住了车,当然那次只是修刹车我没在底下。

#25 Re: change oil yourself

发表于 : 2024年 4月 29日 20:24
mechanic9
wolf_north_1234 写了: 2024年 4月 16日 21:53 架好车,一点也不危险。

重复一遍,架好车,用4 个jack stands.

如只架前轮,要拉起手刹,且用wheel block顶住二后轮。
光用jack stands 还是有点发抖

还可以加两个大木桩在车下面

或者用木板做两个比较宽的 wooden ramp

#26 Re: change oil yourself

发表于 : 2024年 4月 29日 20:59
wolf_north_1234
mechanic9 写了: 2024年 4月 29日 20:24 光用jack stands 还是有点发抖

还可以加两个大木桩在车下面

或者用木板做两个比较宽的 wooden ramp
别胡说八道吓人。

用两个Jack stand架在前减震,拉起手闸,用二个wheel block抵住两后轮。

哪里来的,有点抖?

#27 Re: change oil yourself

发表于 : 2024年 4月 29日 21:22
wolf_north_1234
some of my DIY:

change oil, without lifting the car.

change oil, rotate tires, lifting the car.

drain the coolant.

fix the front passenger side, window regulator.

Since I did not intend to 'show off', only for my own reference, the quality of the photoes are not that good, enjoy.

My car is a 2012, cruze, eco trim level, 1.4L gas turbo engine, 6 speed manual transmission. Now the mileage is 76K.
图片

图片

图片

图片

图片

图片

图片

图片

图片