自己 rotate 轮胎，需要 torque wrench， break bar， 和 socket？

[Cellcycle2]

Firsr, leave wlamart and go to HFT.

torque wrench 1/2， 20 到 150 就够了吧？Yes.

break bar 和 十字的 那种， 那个实用. If you dont plan TO work ON other parts, buy a corded impact wrench (hft, 1000ftibs, only about 50 when on sale). It can remove wheel lug nut within 2 seconds.

socket 有啥推. Buy impact sockets. They can also be used with nonimpact rathcet, break bar...

好，有个 电池的 impact wrench，没试过 轮胎

[Savage]

好，有个 电池的 impact wrench，没试过 轮胎

The one you have is likely an impact driver, not wrench.

Impact driver: 1/4" drive, max torque about 90ibsft

Impact wrench. 3/8,1/2 or even 3/4, min 300 ibsft

Buy the bauer brand big corded impact wrench. It is a beast and you dont need a battery and it is always ready to go except when there is power outage. If cost is not a concern, buy a high torque cordless 1/2 drive, even better

[Cellcycle2]

The one you have is likely an impact driver, not wrench.

Impact driver: 1/4" drive, max torque about 90ibsft

Impact wrench. 3/8,1/2 or even 3/4, min 300 ibsft

Buy the bauer brand big corded impact wrench. It is a beast and you dont need a battery and it is always ready to go except when there is power outage. If cost is not a concern, buy a high torque cordless 1/2 drive, even better

哦， 你是对的， 那我没有

[VladPutin]

吃饱了没事你难道不去做常规保养？

[wolf_north_1234]

Firsr, leave wlamart and go to HFT.

torque wrench 1/2， 20 到 150 就够了吧？Yes.

break bar 和 十字的 那种， 那个实用. If you dont plan TO work ON other parts, buy a corded impact wrench (hft, 1000ftibs, only about 50 when on sale). It can remove wheel lug nut within 2 seconds.

socket 有啥推. Buy impact sockets. They can also be used with nonimpact rathcet, break bar...

If I were you, I would just buy a $20 break bar, I can use it everywhere.

[foxbat]

车里的那个质量非常好，用几十次和新的一样。amazon买的类似的质量奇差，一次用下来，车子几乎举不起，千斤顶发烫，还掉一地的金属碎屑，立刻退掉差评。我有floor jack，但剪刀式的可以用电起子电驱动，省力。

完全同意，随车的比亚麻上的垃圾好多了