举杠铃去了。希望不要又被压
版主: Softfist
Re: 举杠铃去了。希望不要又被压
太麻烦。我现在都不练大重量,练的都是我能举12个的这种量级的。
其实上次被压,我应该也不会死。在胸上慢慢滚,滚到腹部就能起来。
我以前练过225磅被压的自救,这种方法能行。前天被压才205磅。
Re: 举杠铃去了。希望不要又被压
油管上看到有人卧推被杠铃砸到颈部立刻昏迷的,我现在一个人的话只敢用史密斯机。
你能推200多磅,胸肌应该不错啊,奔一个看看。
你能推200多磅,胸肌应该不错啊,奔一个看看。
shanghaibaba 写了: 2022年 8月 8日 21:57 太麻烦。我现在都不练大重量,练的都是我能举12个的这种量级的。
其实上次被压,我应该也不会死。在胸上慢慢滚,滚到腹部就能起来。
我以前练过225磅被压的自救,这种方法能行。前天被压才205磅。
Re: 举杠铃去了。希望不要又被压
放狗搜了下,这个人在quora上回答的,真实重量30到40磅,机器上的有效重量15磅左右
While the Smith machine bar does not have to support the entire weight of the plates, it should be powerful enough to do so. The Smith machine bars are designed to provide that level of strength. If the bare bar were removed from the Smith and weighed, it would be between 30 and 40 pounds (13.6 to 18.1 Kgs). With counterbalance weights and angle motion, equipment manufacturers try to keep the efficient weight of the Smith bar around 15 pounds (6.8 kgs).
While the Smith machine bar does not have to support the entire weight of the plates, it should be powerful enough to do so. The Smith machine bars are designed to provide that level of strength. If the bare bar were removed from the Smith and weighed, it would be between 30 and 40 pounds (13.6 to 18.1 Kgs). With counterbalance weights and angle motion, equipment manufacturers try to keep the efficient weight of the Smith bar around 15 pounds (6.8 kgs).
Re: 举杠铃去了。希望不要又被压
对,这个跟我感觉差不多。完全没有45那么重pda 写了: 2022年 8月 9日 14:34 放狗搜了下,这个人在quora上回答的,真实重量30到40磅,机器上的有效重量15磅左右
While the Smith machine bar does not have to support the entire weight of the plates, it should be powerful enough to do so. The Smith machine bars are designed to provide that level of strength. If the bare bar were removed from the Smith and weighed, it would be between 30 and 40 pounds (13.6 to 18.1 Kgs). With counterbalance weights and angle motion, equipment manufacturers try to keep the efficient weight of the Smith bar around 15 pounds (6.8 kgs).
Re: 举杠铃去了。希望不要又被压
还真是。难怪我史密斯机上能推200多磅,用杠铃最多只能上185磅。
pda 写了: 2022年 8月 9日 14:34 放狗搜了下,这个人在quora上回答的,真实重量30到40磅,机器上的有效重量15磅左右
While the Smith machine bar does not have to support the entire weight of the plates, it should be powerful enough to do so. The Smith machine bars are designed to provide that level of strength. If the bare bar were removed from the Smith and weighed, it would be between 30 and 40 pounds (13.6 to 18.1 Kgs). With counterbalance weights and angle motion, equipment manufacturers try to keep the efficient weight of the Smith bar around 15 pounds (6.8 kgs).