最近汽车clutch 趴窝,需要一段木料。自行车派上用场了。
What are you wrenching this weekend? ![]()
版主: lexian

家里没有第二辆车吗?感觉骑车去HD太危险了。
自行车看着不错,什么牌子的?
wolf_north_1234 写了: 2025年 10月 31日 16:45最近汽车clutch 趴窝,需要一段木料。自行车派上用场了。
What are you wrenching this weekend?
wolf_north_1234 写了: 2025年 10月 31日 16:45最近汽车clutch 趴窝,需要一段木料。自行车派上用场了。
What are you wrenching this weekend?
修clutch需要木头?


wolf_north_1234 写了: 2025年 11月 1日 01:10老婆开车在单位。
下午天气好,就去了。
骑车不危险。
车是,schwinn super sport, 早年旧货店淘, $50? 年代久远,记不太清了。
细胎公路车。有时候调好的老二手车比现买的新车都舒服。我是自己改造了一辆成电动的。
好车
wolf_north_1234 写了: 2025年 10月 31日 16:45最近汽车clutch 趴窝,需要一段木料。自行车派上用场了。
What are you wrenching this weekend?

估计你用错词了(Jack stand).
我未仔细说架车的细节。
用3 ton jack 加两块2x4木头撑起车头,用四个jack stand (俩吃力,俩做额外保险)。拉起手刹,choke the two rear wheels.
撑车时,先不垫木头,撑至最高,放好jack stands, 落下jack, 让车"坐"在jack stands 上。
再加一块木头,再调整jack(木头) 的位置,把车再升高一英寸,调整jack stand 的高度,慢松jack(木头),让车缓慢地落在jack stands 上。
重复以上(jack加两块木头)
Jack 加木头架高车时,木头每次加一块。因为Jack 架车时,会有前后移动。没木头时,jack 会整体移动。而有木头时,木头会有一点倾斜,所以要一块,一块分次加。
Jack加木块有一定的危险,不建议新手做。
架车头,最后的吃力点:
后轮(with pulled up hand brake,wheels choke)
Two jack stands at car, two front supporting pinch well.
Two extra jack stands under the front bottoms of the car, any solid flat metal, used as extra safty.
I might later to take pictures to show.



同感。
我的车是,schwinn super sport, champion no. 2 butted steel frame (自行车爱好者know what I am talking). 700x25 的轮胎,气压
前轮 85 psi
后轮 90 psi.
老的钢架车比最低端的,新铝架车(5 years ago, bicycle shop, $1,200)骑来要好。铝架车,vertical direction is too stiff. 而钢架车(知名的frame, Reynolds 531, true temper, tange, centurion, colnago...)则"硬"的刚刚好。
该电动,我建议用老,无减震的山地车。